Fluke DH Instruments - Pressure Standards, Electronic Deadweight Tester, Gas Flow Standards

Home

Fluke DH Instruments Products High Accuracy Pressure Standards PG7000
Request Quote	PG7000 piston gauges represent state of the art piston gauge technology today. PG7000 piston gauge models cover the entire pressure range from low absolute to 72,500psi. All PG7000 models feature microprocessor control with extensive on board software, real time ambient and operational monitoring and advanced automated features. For more information on PG7000 piston gauges visit: http://www.dhinstruments.com/prod1/pgs.htm. PG7000, already the world’s most advanced piston gauge, takes another step ahead with the introduction of AMH automated mass handling technology. With AMH, piston gauge operation can be fully automated and the entire calibration process can be automated in combination with COMPASS for Pressure software. AMH delivers metrology improvements in addition to huge productivity gains. The AMH system is a PG7000 accessory and can be added to existing platforms or ordered with new installations. Two models are available to cover the complete PG7000 line of gas and oil operated piston gauges including absolute mode with a vacuum reference. Download the Brochure - PG7000-AMH Download the Brochure - PG7000 Fluke website

RPM4 & PPC4 Transfer Pressure Standards
Request Quote	PPC pressure controller/calibrators and RPM4 reference pressure monitors are high accuracy transfer pressure standards suitable for any calibration facility. Fluke DH Instruments PPC pressure controller/calibrators include PPC4 for pneumatic pressures up to 14MPa (2,000psi), PPCH-G for high pressure pneumatic use up to 100 MPa (15,000psi) and PPCH for hydraulic use up to 200MPa. PPC controller/calibrators are offered in a variety of measurement performance classes, user interfaces and communication options to fit your budget and application. Flukes exclusive Q-RPT reference pressure tranducers can be configured inside the controllers or externally in an RPM4 monitor for maximum versatiliity. PPC pressure controllers deliver value with an extermely wide control and measurement range turndown, often replacing multiple legacy instruments with a single one. Easy integration with a PC makes Fluke’s PPC and RPM4 the instruments of choice for calibrating portable pressure calibrators, high accuracy pressure transmitters, and test. Download the Brochure - RPM4 Download the Brochure - PPC4 Download the Brochure - PPC4E Fluke website

E-DWT-H Electronic Deadweight Tester
Request Quote	Introducing a better way to calibrate high pressure hydraulic gauges. E-DWTH is a modern alternative to the conventional hydraulic deadweight tester. It is designed to provide an easier-to-use portable instrument that is at home in the lab or instrument shop, as well as in the field performing insitu calibrations and test. The E-DWT-H’s electronic reference pressure monitor can be configured with one or two internal ranges from 7 MPa (1,000psi) to 200 MPa (30,000psi). With two internal ranges, the E-DWT-H provides uncertainty of ±0.02% of reading from 1 to 100% of full scale range. E-DWT-H features eliminate the need for weights and the associated handling chore, possible errors and shipping costs. With E-DWT-H there is no need to measure ambient conditions and piston temperature, to know local gravity when trying to accurately measure pressure or to ensure that the unit remains level.Electronic output allows for active pressure display, unlimited pressure resolution, AutoTest calibration routines, real-time automated data collection and customized report generation. A rechargeable battery pack accessory allows for up to 8 hours remote operation. Download the Brochure - E-DWT-H Fluke website

High Accuracy Gas Flow Standards DHI Molbloc/Molbox Gas Flow Calibration System
Request Quote	The molbloc/molbox gas flow calibration system from Fluke’s DH Instruments Division uses laminar flow element and sonic nozzle technology to deliver fast, repeatable calibrations in the range of less than 1 sccm to over 5,000 slm. Customers can choose from two different measurement terminals and multiple flow element ranges and calibration options to allow measurments with uncertainty as low as ±0.125% of reading in several gases. Measurements are traceable through DHI’s GFS2102 primary gravimetric flow system. All molbloc elements allow precise real-time readings to enable quick testing and easy adjustment of instruments under test. The system is ideal for testing mass flow meters and controllers, rotameters and other gas flow devices. Many calibrations can be fully automated and adjustments for the effect of varying ambient conditions on these devices can be automatically performed using COMPASS for Flow software. Fluke website

Software COMPASS Calibration Assistance Software
Request Quote	COMPASS for Pressure and COMPASS for Flow calibration assistance software are the missing links to turn individual automated hardware components into fully automated pressure and fl ow calibration systems quickly, and without consuming your internal engineering resources. COMPASS is an off-the-shelf universal platform offered in two versions to support all of your pressure and flow calibration software needs, providing consistent test management, data acquisition and automatic report generation. The two COMPASS programs integrate calibration functions with pressure and flow specific features that are missing from more generic software packages. COMPASS allows simple export of test data to Fluke’s popular Met/Cal database to integrate calibration optimization and asset and quality management requirements. Fluke website

Training Specialized Training Courses
Request Quote	The experts at Fluke’s DH Instruments Division host four different courses in their Phoenix, AZ training facility several times throughout the year. Metrologists, technicians and engineers from pressure and flow laboratories around the world have benefited from DHI’s courses, visit the link below for more information. Topics are Precision Pressure Calibration, Advanced Piston Gauge Metrology and Effective Area Determination, Gas Flow Calibration using molboc/molbox and setting up and running COMPASS for Pressure Software. Fluke also offers affordable expert onsite installation and training services for new equipment purchases. Fluke website